815-847-7722

DID YOU KNOW THE ASSEMBLY OF YOUR PRODUCT COULD BE A QUARTER TURN AWAY FROM A MAJOR RECALL?

PEAK INNOVATIONS ENGINEERING HAS THE HIGHLY TECHNICAL TEAM TO DESIGN, TEST, VALIDATE, AND ENHANCE THE BOLTED JOINTS WITHIN YOUR PRODUCT APPLICATION.

Joint development and testing is all we do, so we do it better than other internal and external options. Why consume your resources when we can take care of it for you quickly, definitively and cost effectively?

WHY OUTSOURCE JOINT TESTING?

Peak innovations Engineering is an ideal choice for joint testing and development. By relieving your engineers of joint testing, they can focus on engineering improvements increasing revenue and sales. Our experience and expertise allows us to optimize joints, propose cost reduction of labor and material and troubleshoot poor yield.

WHY USE PEAK?

Peak innovations Engineering offers independent third-party fastener, joint or equipment testing. Our in-house lab accommodates immediate testing of proposed designs or changes. Peak’s specialized testing can optimize your process parameters including; torque, force, time, etc. Many of our tests can be performed at the customer’s location if requested.

How to Use a COF Testing Machine?

Jan 18, 2021 | Blog Posts, COF Testing Machine

The coefficient of friction is definitely the ratio of friction force to typical force. Most material combinations show two sorts of friction – a sturdy frictional force when the materials usually are not sliding (static friction) and a weaker force when they are sliding (kinetic friction). Distinct strategies are used to measure every sort of friction. The two components could be tilted to measure the static coefficient of friction until among the supplies begins to slide. The static coefficient of friction will be the tangent from the tilt angle when the materials commence sliding. Measuring the kinetic coefficient of friction is a lot more involved and demands cautious measurement with force required to help keep two components sliding at a continual speed. Many test rigs happen to be made for this. One of the essential factors is that the test situations match application situations as closely as possible to ensure that final results are relevant to the application.

Uses of COF Testing Machine

COF testing machine is employed to determine the frictional qualities of a plastic film and sheeting. It is actually typically determined to the ease by which two surfaces slide against one another. It is the maximum worth of your frictional force divided by the typical force. A low COF indicates that the surfaces are smoother, e.g., much less resistant to a sliding motion. A coefficient of friction (COF) provides a relative indication of frictional characteristics. Controlling COF allows processors to optimize efficiency and steer clear troubles informing, transporting, and storing packages.

Slip/Antilsip/Antiblock Masterbatches are incorporated into polymer films to minimize their coefficient of friction (COF). Such COF reduction is vital in packaging lines exactly where the film’s frictional qualities can govern the film’s functionality in contact with rollers. COF is reported in two values: static: the force required to begin the movement, and kinetic: the force required to retain movement.

Weathering Aging Testing for Plastics

Some laboratories supplies accelerated aging testing of plastics items. Plastics are exposed to all sorts of environmental impacts during their lifetime, including light, humidity, and temperature. Our authorities test the resistance of polymeric solutions against environmental influence, weathering, temperature, humidity, repeated sterilization, or UV/ Xenon exposure. The polymer supplies or merchandise will probably be exposed below defined circumstances to heat, UV, and other stress to identify its critical properties before and after exposure.

Distinctive accelerated exposure tests may very well be used depending on item kind and application. The two most common COF testing machines for measuring the static coefficient of friction are C-1028 and D-2047. The procedures and results of these two tests are extremely diverse and cannot be compared. The D-2047 COF testing machine makes use of tests within a controlled laboratory atmosphere that measures on dry, smooth surfaces and can’t be used in the field on existing flooring surfaces.

THE PROOF IS IN THE REPORTING!

Critical analysis of the testing data and subsequent reporting is our brand signature.

Read More >>

Experiencing Joint Failure?

We can design, test, validate, and enhance new and existing bolted joints.

Read More >>

 

NEED MORE TESTING CAPACITY?

We partner with OEMs demanding increased joint testing capacity.

Read More >>

Get Fastener Help Now!